80mm & 85mm Borewell Submersible Pumps
Lena+ (85mm)
Lena (80mm)
Zuno Lite
Lena+ (85mm)
Introducing the LENA Series by CRI. Our submersible pumps are meticulously crafted for modern homes and are available in 0.75 hp, 1 hp, 1.5 hp, and 2 hp. With built-in check valves and advanced cooling technology, they deliver consistent performance and exceptional longevity. The special thrust bearings offer durability under heavy loads, making them perfect for residential use.
Applications
- Domestic
- Garden
- Civil applications
- Farms
Key Features
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water-lubricated bearing
- Thread-type motor construction ensures service feasibility
- Designed for wide voltage operation
- Additional intermediate bearing in higher-stage pumps
All you need to know about – 80mm & 85mm Borewell Submersible Lena+ (85mm)
Specifications
| Power Range | 0.75 kW – 1.5 kW (1 HP – 2 HP) |
| Speed | 2900 RPM |
| Version | Single Phase 220V, 50Hz, A.C. Supply |
| Maximum total head | 214 metre |
| Maximum flow rate | 0.9 lps (3.4 m³/h) |
| Maximum outer diameter | 92 mm |
| Thrust load | 650 lbs |
| Minimum cooling flow along the motor | 0.15 m/sec |
| Method of starting | Capacitor Start Capacitor Run (CSCR) |
| Maximum starts per hour | 20 times |
| Nominal outlet size | 32 mm |
Material of Construcation – Pump
| Part Name | Material |
| Check valve housing | Cast iron |
| Outer shell | Stainless Steel |
| Impeller | Noryl |
| Diffuser chamber | Noryl |
| Counter thrust pad | Hylem |
| Intermediate bearing (Sleeve / Bush) | SS – 304 / NBR |
| Suction inter connector | Cast iron |
| Pump shaft | SS – 304 |
| Coupling | SS – 410 |
| Part Name | Material |
| Stator shell | SS 304 |
| Shaft seal | Nitrile Butyl Rubber / Mechanical Seal |
| Motor base | Cast iron |
| Motor Shaft | SS – 431 |
| Bearing | SS Ball Bearing |
| Snap Ring | SS – 316 |
This is the additional content that will be shown or hidden.
Lena (80mm)
Introducing the LENA Series by CRI. Our submersible pumps are meticulously crafted for modern homes and are available in 0.75 hp, 1 hp, 1.5 hp, and 2 hp. With built-in check valves and advanced cooling technology, they deliver consistent performance and exceptional longevity. The special thrust bearings offer durability under heavy loads, making them perfect for residential use.
Applications
- Domestic
- Garden
- Civil applications
- Farms
Key Features
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water-lubricated bearing
- Thread-type motor construction ensures service feasibility
- Designed for wide voltage operation
- Additional intermediate bearing in higher-stage pumps
All you need to know about – 80mm & 85mm Borewell Submersible Lena (80mm)
Specifications
| Power Range | 0.55 kW – 1.1 kW (0.75 HP – 1.5 HP) |
| Speed | 2800 RPM |
| Version | Single Phase 220V, 50Hz, A.C. Supply |
| Maximum total head | 156 metre |
| Maximum flow rate | 1.5 lps (5.40 m³/h) |
| Maximum outer diameter | 78 mm |
| Thrust load | 650 lbs |
| Minimum cooling flow along the motor | 0.15 m/sec |
| Method of starting | Capacitor Start Capacitor Run (CSCR) |
| Maximum starts per hour | 20 times |
| Nominal outlet size | 25 & 32 mm |
Material of Construcation – Pump
| Part Name | Material |
| Check valve housing | Cast iron |
| Outer shell | Stainless Steel |
| Impeller | Noryl |
| Diffuser chamber | Noryl |
| Counter thrust pad | Hylem |
| Intermediate bearing (Sleeve / Bush) | SS – 304 / NBR |
| Suction inter connector | Cast iron |
| Pump shaft | SS – 304 |
| Coupling | SS – 410 |
| Part Name | Material |
| Stator shell | SS 304 |
| Shaft seal | Nitrile Butyl Rubber / Mechanical Seal |
| Motor base | Cast iron |
| Motor Shaft | SS – 431 |
| Bearing | SS Ball Bearing |
| Snap Ring | SS – 316 |
This is the additional content that will be shown or hidden.
Zuno Lite
The C.R.I. Zuno Lite Series comprises 80mm borewell submersible pumps with a submersible electric motor that operates quietly, even at significant depths. Available in 1 hp and 1.5 hp variants, these pumps provide a steady and robust water supply, incorporating stainless steel and thermoplastic to protect against corrosion. The submersible motor is filled with a non-toxic liquid for improved performance under low-voltage circumstances. At the same time, the check valve prevents reverse flow and water hammering, making them one of the best submersible pumps for a wide range of residential needs.
Applications
- Domestic
- Garden
- Civil applications
- Farms
Key Features
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water-lubricated bearing
- Thread-type motor construction ensures service feasibility
- Designed for wide voltage operation
- Additional intermediate bearing in higher-stage pumps
All you need to know about – 80mm & 85mm Borewell Submersible (Zuno Lite)
Specifications
| Power Range | 0.75 kW & 1.1 kW (1.0 HP & 1.5 HP) |
| Speed | 2800 RPM |
| Version | Single Phase 220V, 50Hz, A.C. Supply |
| Maximum Total Head | 70 metre |
| Maximum Flow Rate | 1.5 lps (5.40 m³/h) |
| Maximum Outer Diameter | 78 mm |
| Thrust Load | 650 lbs |
| Minimum Cooling Flow Along the Motor | 0.15 m/sec |
| Method of Starting | Capacitor Start Capacitor Run (CSCR) |
| Maximum Starts per Hour | 20 times |
| Nominal Outlet Size | 32 mm |
Material of Construction – Pump
| Part Name | Material |
| Check valve housing | Cast iron |
| Outer shell | Stainless Steel |
| Impeller | Noryl |
| Diffuser chamber | Noryl |
| Counter thrust pad | Hylem |
| Intermediate bearing (Sleeve / Bush) | SS – 304 / NBR |
| Suction inter connector | Cast iron |
| Pump shaft | SS – 304 |
| Coupling | SS – 410 |
| Part Name | Material |
| Stator shell | SS 304 |
| Shaft seal | Nitrile Butyl Rubber / Mechanical Seal |
| Motor base | Cast iron |
| Motor Shaft | SS – 431 |
| Bearing | SS Ball Bearing |
| Snap Ring | SS – 316 |
This is the additional content that will be shown or hidden.
Introducing the LENA Series by CRI. Our submersible pumps are meticulously crafted for modern homes and are available in 0.75 hp, 1 hp, 1.5 hp, and 2 hp. With built-in check valves and advanced cooling technology, they deliver consistent performance and exceptional longevity. The special thrust bearings offer durability under heavy loads, making them perfect for residential use.
Applications
- Domestic
- Garden
- Civil applications
- Farms
Key Features
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water-lubricated bearing
- Thread-type motor construction ensures service feasibility
- Designed for wide voltage operation
- Additional intermediate bearing in higher-stage pumps
All you need to know about – 80mm & 85mm Borewell Submersible Lena+ (85mm)
Specifications
| Power Range | 0.75 kW – 1.5 kW (1 HP – 2 HP) |
| Speed | 2900 RPM |
| Version | Single Phase 220V, 50Hz, A.C. Supply |
| Maximum total head | 214 metre |
| Maximum flow rate | 0.9 lps (3.4 m³/h) |
| Maximum outer diameter | 92 mm |
| Thrust load | 650 lbs |
| Minimum cooling flow along the motor | 0.15 m/sec |
| Method of starting | Capacitor Start Capacitor Run (CSCR) |
| Maximum starts per hour | 20 times |
| Nominal outlet size | 32 mm |
Material of Construcation – Pump
| Part Name | Material |
| Check valve housing | Cast iron |
| Outer shell | Stainless Steel |
| Impeller | Noryl |
| Diffuser chamber | Noryl |
| Counter thrust pad | Hylem |
| Intermediate bearing (Sleeve / Bush) | SS – 304 / NBR |
| Suction inter connector | Cast iron |
| Pump shaft | SS – 304 |
| Coupling | SS – 410 |
| Part Name | Material |
| Stator shell | SS 304 |
| Shaft seal | Nitrile Butyl Rubber / Mechanical Seal |
| Motor base | Cast iron |
| Motor Shaft | SS – 431 |
| Bearing | SS Ball Bearing |
| Snap Ring | SS – 316 |
This is the additional content that will be shown or hidden.
Introducing the LENA Series by CRI. Our submersible pumps are meticulously crafted for modern homes and are available in 0.75 hp, 1 hp, 1.5 hp, and 2 hp. With built-in check valves and advanced cooling technology, they deliver consistent performance and exceptional longevity. The special thrust bearings offer durability under heavy loads, making them perfect for residential use.
Applications
- Domestic
- Garden
- Civil applications
- Farms
Key Features
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water-lubricated bearing
- Thread-type motor construction ensures service feasibility
- Designed for wide voltage operation
- Additional intermediate bearing in higher-stage pumps
All you need to know about – 80mm & 85mm Borewell Submersible Lena (80mm)
Specifications
| Power Range | 0.55 kW – 1.1 kW (0.75 HP – 1.5 HP) |
| Speed | 2800 RPM |
| Version | Single Phase 220V, 50Hz, A.C. Supply |
| Maximum total head | 156 metre |
| Maximum flow rate | 1.5 lps (5.40 m³/h) |
| Maximum outer diameter | 78 mm |
| Thrust load | 650 lbs |
| Minimum cooling flow along the motor | 0.15 m/sec |
| Method of starting | Capacitor Start Capacitor Run (CSCR) |
| Maximum starts per hour | 20 times |
| Nominal outlet size | 25 & 32 mm |
Material of Construcation – Pump
| Part Name | Material |
| Check valve housing | Cast iron |
| Outer shell | Stainless Steel |
| Impeller | Noryl |
| Diffuser chamber | Noryl |
| Counter thrust pad | Hylem |
| Intermediate bearing (Sleeve / Bush) | SS – 304 / NBR |
| Suction inter connector | Cast iron |
| Pump shaft | SS – 304 |
| Coupling | SS – 410 |
| Part Name | Material |
| Stator shell | SS 304 |
| Shaft seal | Nitrile Butyl Rubber / Mechanical Seal |
| Motor base | Cast iron |
| Motor Shaft | SS – 431 |
| Bearing | SS Ball Bearing |
| Snap Ring | SS – 316 |
This is the additional content that will be shown or hidden.
The C.R.I. Zuno Lite Series comprises 80mm borewell submersible pumps with a submersible electric motor that operates quietly, even at significant depths. Available in 1 hp and 1.5 hp variants, these pumps provide a steady and robust water supply, incorporating stainless steel and thermoplastic to protect against corrosion. The submersible motor is filled with a non-toxic liquid for improved performance under low-voltage circumstances. At the same time, the check valve prevents reverse flow and water hammering, making them one of the best submersible pumps for a wide range of residential needs.
Applications
- Domestic
- Garden
- Civil applications
- Farms
Key Features
- More durability and hygiene
- High operating efficiency
- Specially designed thrust bearing to withstand high axial thrust load
- Extremely hardwearing water-lubricated bearing
- Thread-type motor construction ensures service feasibility
- Designed for wide voltage operation
- Additional intermediate bearing in higher-stage pumps
All you need to know about – 80mm & 85mm Borewell Submersible (Zuno Lite)
Specifications
| Power Range | 0.75 kW & 1.1 kW (1.0 HP & 1.5 HP) |
| Speed | 2800 RPM |
| Version | Single Phase 220V, 50Hz, A.C. Supply |
| Maximum Total Head | 70 metre |
| Maximum Flow Rate | 1.5 lps (5.40 m³/h) |
| Maximum Outer Diameter | 78 mm |
| Thrust Load | 650 lbs |
| Minimum Cooling Flow Along the Motor | 0.15 m/sec |
| Method of Starting | Capacitor Start Capacitor Run (CSCR) |
| Maximum Starts per Hour | 20 times |
| Nominal Outlet Size | 32 mm |
Material of Construction – Pump
| Part Name | Material |
| Check valve housing | Cast iron |
| Outer shell | Stainless Steel |
| Impeller | Noryl |
| Diffuser chamber | Noryl |
| Counter thrust pad | Hylem |
| Intermediate bearing (Sleeve / Bush) | SS – 304 / NBR |
| Suction inter connector | Cast iron |
| Pump shaft | SS – 304 |
| Coupling | SS – 410 |
| Part Name | Material |
| Stator shell | SS 304 |
| Shaft seal | Nitrile Butyl Rubber / Mechanical Seal |
| Motor base | Cast iron |
| Motor Shaft | SS – 431 |
| Bearing | SS Ball Bearing |
| Snap Ring | SS – 316 |
This is the additional content that will be shown or hidden.
You might also like
How can we support you?
